Vinyl Decking

What is the Vinyl Decking benefits?

  •  Vinyl Decking material is a beautiful, skid-resistant surface and last-long waterproof protection.
  • The Vinyl installation process is short and can be used immediately after installation.
  • Vinyl decking is affordable, low-maintenance and easy to clean.
  • It is a waterproof deck flooring, therefore, could be used as a dry area below the elevated decks.
  • This waterproof deck covering protects the structure from rot.
Services

Care and Cleaning

The vinyl deck membrane is easy to clean. Scrubbing the surface in a circular motion by a stiff broom and lukewarm water. Then wash away the loose dirt. You may also use a pressure washer with a maximum of 1500 PSI and hold the nozzle 12 inches from the surface.

Vinyl deck flooring is easy to snow and ice removal with common methods. It is fine to use a plastic-edged snow shovel (not a metal edge).

Frequently Asked Questions

How much does Vinyl cost?

The final cost depends on the deck’s shape and condition. We should cover the flashings and the wall skirt. Vinyl comes 6 feet wide so might have some leftover.

How long does installation take?

Installation for a regular deck will get done in a day.

How long after installation the deck is available for use?

Immediately after installation, the deck is ready to go.

What temperatures does Vinyl withstand?

From -40 degrees Celsius to 80 degrees Celsius.

What is Vinyl decking made of?

Vinyl is made with polyvinyl chloride (PVC), with UV screens and stabilizers to prolong the life of PVC materials, the thicker the vinyl is, the greater its resistance to UV degradation.

What is the Vinyl decking width?

Vinyl decking comes in 72” wide.

Which surface is fine to install the Vinyl?

Plywood or untreated concrete is the best for under the Vinyl.

Which surface isn’t fine to install the Vinyl?

Painted Surface, Treated Concrete, Treated Lumber

How can I care for or clean the Vinyl?

Scrub the surface in a circular motion with a stiff broom and lukewarm water. Then wash away the loose dirt. You may also use a pressure washer with maximum1500 psi and hold the nozzle 12 inches from the surface.
Avoid using chemicals on the vinyl (Can use soap and water)


©  TOPCON - All Rights Reserved.
Vancouver Web Design & SEO by ProLoyalWeb.